2026 Tampa Bay Pricing Guide
Kitchen Remodeling Cost in Tampa Bay (2026)
Real market ranges, broken down line by line — cabinets, counters, labor, permits, and the contingency nobody warns you about.
- Line-by-line 2026 Tampa Bay ranges
- What drives your number up — and down
- Fixed itemized proposal, no vague allowances
- Free in-home measure before any price
Free in-home design consultations — call or request a quote and we'll schedule a visit
Request your free consultation
Tell us about the project. We'll come measure, then send a fixed, itemized proposal — no obligation.
You searched for a number, so here is the honest one: most Tampa Bay kitchen remodels land between $30,000 and $60,000 for a full mid-range renovation inside the existing footprint. Cosmetic refreshes start near $15,000. Gut remodels that move walls run $60,000 to $120,000 and up.
That spread is not evasion — it is the actual shape of the market. A 90-square-foot galley with stock cabinets and a laminate counter and a 180-square-foot open-plan kitchen with custom inset cabinetry are both "a kitchen remodel," and they are not within $50,000 of each other. Below we break the number down by size, by scope, and by line item so you can locate yourself in the range.
One Tampa-specific factor worth knowing before you budget: labor and materials in this market run roughly 18–23% above national averages. National calculators will under-quote you here.
What it costs, by scope
Find yourself in the range before you talk to anyone. These are typical Tampa Bay market ranges — not our price list.
Budget / cosmetic
$15,000 – $30,000
Layout stays, surfaces change
- Cabinet refacing or professional repaint ($2,500–$6,000)
- Stock or in-stock semi-custom cabinetry
- Laminate, butcher block, or entry-level quartz
- New hardware, sink, faucet, and lighting
Mid-range
$30,000 – $60,000
Where most Tampa Bay homeowners land
- New semi-custom cabinetry
- Quartz or granite countertops
- New flooring, backsplash, and lighting
- Electrical and plumbing brought to current code
- Mid-tier appliance package ($5,000–$10,000)
High-end / full gut
$60,000 – $120,000+
Reconfiguring the floor plan
- Wall removal with engineered header
- Custom cabinetry, panel-ready appliances
- Premium stone, waterfall edges, full-height slab backsplash
- Relocated plumbing, full electrical rework, designer lighting
These are typical Tampa Bay market ranges for 2026 — not a quote and not our price list. Tampa Bay labor and materials run roughly 18–23% above national averages, and every number moves with your layout, structural conditions, and finish level. We give you a fixed, itemized proposal after a free in-home measure.
By kitchen size
Size is the fastest way to locate yourself in the range.
| Item | Typical Tampa Bay range | Notes |
|---|---|---|
| Small — under 90 sq ft | $15,000 – $40,000 | — |
| Medium — 90–120 sq ft | $24,000 – $74,000 | Includes the classic 10×10 |
| Large — 120–200 sq ft | $40,000 – $100,000+ | — |
| Installed cost per sq ft | $150 – $350 | Mid-range typically $180–$300 |
By line item
Where the money actually goes on a typical Tampa Bay kitchen.
| Item | Typical Tampa Bay range | Notes |
|---|---|---|
| Cabinetry | $188 – $606 / linear foot | Usually the single largest line |
| Countertops | $39 – $557 / sq ft | Laminate at the bottom, exotic slab at the top |
| Flooring, installed | $3 – $20 / sq ft | — |
| Backsplash | $39 – $557 / sq ft | — |
| Appliance package | Under $5,000 · $5,000–$10,000 · $10,000+ | Budget / mid / premium |
| Labor | 25 – 35% of total budget | — |
| Permits & inspections | $700 – $950 | — |
| Demolition & disposal | $2,000 – $4,000 | — |
| Contingency (plan for it) | 10 – 15% of budget | Older Tampa homes hide surprises behind walls |
What's included
- A free in-home measure before any number is discussed
- An itemized, fixed-scope proposal — every line visible
- Honest scope-down options if the budget and the wish list do not meet
- Allowance transparency: you see the real cost of every selection
- Permit and inspection fees stated up front, not discovered later
- Change-order pricing agreed in writing before work proceeds
How the project runs
- Phone call
Tell us the room and the target
A rough size and a budget band is enough to start. We will tell you straight away whether the two are compatible.
- 60–90 min
Free in-home measure
Real numbers need real conditions — cabinet runs, electrical panel capacity, what is actually behind the wall.
- 1–2 weeks
Itemized fixed proposal
Every line visible: cabinetry, counters, labor, permits, contingency. No lump-sum mystery, no allowance games.
- As needed
Scope-down conversation if needed
If the wish list overruns the budget, we show you which trade-offs buy back the most money without wrecking the result.
Timeline
Pricing takes about a week and a half from the in-home measure. Build timelines run 6–12 weeks on site once selections and permits are done.
Permits & Florida code
Kitchen remodels in Pinellas, Hillsborough, and Pasco pull permits any time electrical, plumbing, gas, or structure changes — which is nearly every real remodel. Florida Building Code requires GFCI/AFCI protection, dedicated small-appliance circuits, and code-compliant venting. Removing a wall means an engineered header and a structural review. We pull the permits, schedule every inspection, and close them out — you never deal with the county counter.
The decisions that move your number
The four things worth thinking about before you get quotes.
The cheapest real saving is keeping the plumbing where it is
Moving a sink or a gas line means opening floors and re-inspecting. Staying put often saves thousands with zero visible compromise.
Refacing vs. replacing cabinetry
Sound boxes plus new doors, drawer fronts, and hardware gets you most of the visual change for a fraction of the price. Only replace when the layout is genuinely wrong.
Counters are where budgets swing hardest
The per-square-foot spread on countertops is wider than any other line. A quartz that photographs identically to the exotic slab can be a five-figure decision.
Always fund the contingency
In Tampa Bay's older housing stock, opening a wall finds cloth wiring, cast iron, or an unpermitted past remodel often enough that 10–15% is planning, not pessimism.
How we work
Not claims about how good we are — commitments about how the project runs.
Design–build under one contract
The team that designs your kitchen or bath is the team that builds it. One contract, one schedule, one person accountable — no handoff gap between designer and contractor.
Fixed scope, itemized proposal
Every line is visible before you sign — cabinetry, counters, labor, permits, contingency. Change-order pricing is agreed in writing before any extra work proceeds.
Permits pulled and closed
We handle Pinellas, Hillsborough, and Pasco permitting end to end, schedule every inspection, and close the permit out. You never deal with the county counter.
Waterproofing flood-tested before tile
Every shower pan we build is flood-tested and inspected before a single tile goes on. It is the cheapest line to cut and the most expensive one to redo.
Built to the Florida Building Code
GFCI and AFCI protection, dedicated circuits, code ventilation, engineered headers, and inspected moisture barriers — the requirements that actually matter in Florida humidity.
Kitchens and baths only
We do not take on roofing, additions, or general handyman work. Two rooms, done to a standard that only comes from specialising.
Frequently Asked Questions
How much does a kitchen remodel cost in Tampa in 2026?
Most homeowners spend $30,000 to $60,000 for a full mid-range kitchen remodel in the existing footprint. Cosmetic refreshes run $15,000 to $30,000, and full gut remodels with wall removal run $60,000 to $120,000 and up. Per square foot, Tampa Bay kitchens run about $150 to $350 installed.
What is the most expensive part of a kitchen remodel?
Cabinetry, in almost every project — typically $188 to $606 per linear foot in this market. Countertops are usually second, and labor runs 25 to 35% of the total budget.
How much is a 10x10 kitchen remodel in Tampa?
A 10×10 is roughly 100 square feet, which puts it in the medium band — typically $24,000 to $74,000 depending on whether you are refacing or replacing cabinetry and where your counter selection lands.
Why are Tampa kitchen remodels more expensive than national averages?
Tampa Bay labor and material costs run roughly 18–23% above national averages. National cost calculators will consistently under-quote projects in this market.
How much should I budget for surprises?
Plan 10–15% on top of the contracted scope. Tampa Bay's older housing stock regularly hides cloth wiring, cast-iron drain lines, or unpermitted previous work behind the drywall.
Do you charge for an estimate?
No. The in-home consultation and the itemized proposal are free. We would rather find out early that the budget and the scope do not match than waste your time.
Related
Free consultation
Let's price your kitchen remodeling cost properly.
We measure in person, then send a fixed, itemized proposal. No obligation, no pressure, and no allowance games.
Prefer to talk it through? Calling is usually faster than a form.